Did you meet the 0xc0000001 error code on a blue screen that suddenly appeared in front of you while you were doing something on your PC? Then this is the right place to find the solution.
This is an error that appears when you have damaged memory or your system files are corrupt. This will force your PC to restart and display this error message.
In this article, I will show you the methods by which you can correct the error code 0xc0000001 on your Windows PC 7.10.
What is error code 0xc0000001?
This is a BSOD error that occurs whenever there is system file corruption on your PC or part of the memory is damaged. When a device or software necessary to perform an operation cannot be accessed or opened, this error is displayed. This is a serious error that needs to be fixed before you can continue working on your PC.
What is causing the 0xc0000001 error?
The BSOD error can be caused by a variety of reasons. Some of them are listed below.
- Missing or damaged system files– If some essential system files are missing from your PC due to disk write errors or power failure, this error can occur
- Missing or damaged SAM (Security Account Manager) files– These files store user identification information. This is vital user information and essential for starting Windows.
- Damaged RAM– If this is the case, the RAM must be changed. The given methods will only work if the equipment is repaired
How to fix error 0xc0000001?
Here I will walk you through the methods on how to fix error 0xc0000001. To do this, follow the methods below.
1. Start at the last known good configuration
Sometimes recently installed or not installed applications can cause configuration faults. So starting at the last known good configuration can correct the error. Follow the given steps
- Restart your PC
- hurry f8 or f12 during startup to access the advanced boot manager.
- Select now Last known good configuration by scrolling through the arrow keys and pressing Enter.
Now the PC will restart and if it starts regularly as before, the problem is solved by this method.
2. Create a system restore point.
Typically, the operating system itself creates a system restore point when it is functioning properly. If the system restore point is in place, you can restore your system and correct the error. Here are the steps to do it
Note: Some PCs have a shortcut to directly access the system restore point like f10 or f11. Try to press them at startup and you will be redirected to the repair menu.
- Go to the Windows configuration screen and click Next, then click Fix your computer
- Then go to help option and click System Restauration.
- When the System Restauration window opens, click Next. Then select a restore point from when your system was working properly and press Next once again.
- After clicking Next, click Finish and wait for the system to return to what it was before the error.
3. Copy the SAM file
If the integrity of your SAM file is compromised, the error code 0xc0000001 could happen. So getting a new copy of the SAM file from the repair folder can resolve this error.
To do this, follow the steps
- Obtain a USB stick of at least 8 GB of space. Download the installation media now from this link Installation support tool and follow the steps on the site to create the installation media.
- Now that you have created the installation media, connect the USB to the PC and boot it using the boot manager
- Click Repair your computer in the wizard.
- Then go to Troubleshooting, then Advanced Options, then Command Prompt.
- Now enter the code copy C: Windows Repair Sam C: Windows System32 Config and hit Enter. hurry Yes to confirm the copy if requested.
Since you copied a new copy of your SAM file from the repair folder, the error should be resolved.
4. Uninstall recently installed software after entering Safe Mode
Some software can corrupt files. Uninstalling can therefore correct the error. To do this, follow the steps
- Start in Safe mode first by following the steps given in the above method.
- Go to beginning and type applications
- Then sort them by their installation dates
- Uninstall all installed applications before the error occurs.
- After that restart your PC and check if the error is corrected.
5. Check the hard drive
Sometimes, due to a hard drive failure, the error can occur. So check your hard drive via chkdsk can resolve this error. Follow the steps
- Go to the Windows configuration screen and click on next then click on Fix your computer
- Then go to help option and then go to Advanced options and click Command Prompt.
- Type the command chkdsk c: / f and hit Enter. Change the name of the drive according to the drive where your Windows is installed.
- It will take a while and once the process is complete, restart and check if the error is corrected.
5. Run SFC
- Go to the Windows configuration screen and click on next then click on Fix your computer
- Then go to help then go to Advanced options and click Command Prompt.
- Type sfc / scannow or sfc / scannow / offbootdir = C: / offwindir = C: Windows and hit Enter. (VS represent the drive on which Windows is installed).
Leave the analysis finished. Once the operation is complete, restart the PC and check if the error is corrected.
6. Reset the PC
If none of the above methods work, the ultimate solution is to reset your PC from the Windows start screen.
- Go to the Windows start screen and click Troubleshoot.
- Then click on Reset this PC option
- Now select the Keep my files and reset the PC.
- Now restart your computer and check whether the error is corrected or not.
7. Manage Ram
Check if you’ve recently added new RAM modules. According to many users, a new RAM module was the cause of this startup error. Modify the RAM modules to see if they are causing this error.
Conclusion
These are the best possible ways to resolve the 0xc0000001 Fault. I hope you were able to clearly understand and perform the steps to fix the bug.
If the issue is not resolved, or if you are having difficulty understanding or performing any of the steps, please feel free to comment below.
Also read: Restart and select the appropriate boot device [Quick Fix]
->