Fix: Internet Explorer Cannot Display the Webpage 2025

Although it is very rare that anyone uses Internet Explorer in the world of Chrome, Firefox and Opera, there are still many people who like simplicity and use Internet Explorer to surf the Internet. Since you are here, I guess you too are one of those I.E. users. Using the Internet is fun and educational and does not change the content of the content if you have a browser. But what bothers most is that the browser does not connect to the Internet. Similarly, for Internet Explorer, one of the problems of the browser is the occurrence of the error "Internet Explorer can not display the web page ". The error can occur on the I.E. browser for several reasons, but it is very easy to solve. Just follow the steps below, one by one, and you will eventually resolve the error at each step.

How to fix "Internet Explorer can not display the web page"?

The solutions provided below will apply to all versions of Internet Explorer and also to all versions of the Windows operating system. It will be mentioned in a particular step if it is for a different version.

1. Check your Internet source.

Whichever source of Internet you use on your PC, restart it and check if your PC is properly connected to it. Often, big problems are not so important until we make them big and offer only small, simple solutions. Check the connections correctly and then see if your Internet Explorer can not display the web page the error is resolved or not.

If not, let's solve it by following the methods below.

2. Navigation data.

You can simply delete your browsing history and cookies and resolve the error. What's going on, is that sometimes cooking stored on your PC can get corrupted and can cause the problem of Internet Explorer can not display any web page. To delete your history, follow these steps:

Open the Run command by pressing the button Windows + R key on your keyboard.
Now in the search field, enter inetcpl.cpl and press the Enter key.

In the new windows of Internet properties, make sure to be in the General tongue.

Then press the Wipe off button.
Now check all available options in the new windows as shown in the figure.

Finally, press the button Wipe off button to delete them.
Restart the Internet Explorer browser.

The error may have been resolved if cookies or damaged data had been stored.

3. Disable add-ons

If you have new add-ons installed in your browser or you have authorized add-ons to install or open third-party websites that may affect your computer, you must disable it to resolve the problem. Internet Explorer can not display the Web page error.

Open Internet Explorer and in the upper right corner, click on the button tools or settings option.
To choose Manage Add-ons option of the list.

In the add-ons management windows, select the All add-ons option from the drop-down list.

Then select all additions by pressing Ctrl + A key together.
So chosen Disable all button.

Then press the close button below.

Restart your browser and check now if the error is resolved and the web pages load or not.

4. Disable proxy settings

Open the Run order using Windows + R key on your keyboard.
In the search box, type inetcpl.cpl open internet properties.

Go to Connections tab and click on the Lan parameters option.

Check the Automatically detect settings option & uncheck the option marked below the image.

Restart your device for the changes to take effect, and then check the Internet Explorer Can not View Some Web Pages error in Internet Explorer. If it is not resolved, proceed to the next step.

5. Get a new IP address

The problem was resolved when users renewed their IP address. So, you can also solve the Internet Explorer Can not Display Web Page Error by renewing your IP address. You can follow the steps one by one to renew the IP on your PC.

Press the Windows key + X and open the Command prompt (Admin).

In the command prompt, enter the following command to IP release

ipconfig /release

After entering the command above, press Enter.
Now, enter the command below to renew IP & hurry Enter.

ipconfig /renew

When both commands are executed, you can exit the command prompt by entering exit.

Now, restart your computer to check if the problem is resolved or still exists. If the error is not resolved, proceed to the next step.

6. Disable the enhanced protection mode

Internet Explorer has a strong protection mode that sometimes does not allow you to access certain websites. If he finds corrupted files in cookies or data from your browser, it does not allow access to the internet. So, if you have cleared your navigation data in one of the previous steps, you can disable the Improved mode of protection to solve the Internet Explorer Can not View Some Web Pages problem.

Open the Run command using the Windows + R key.
Now in the search field, enter inetcpl.cpl and press Enter key.

This opens the Internet properties dialog box.
Make sure to be in the Advanced tab and scroll to the end of the Settings section.

Uncheck the Enable the enhanced protection mode.
hurry D & #39; agreement make changes.

After that restart the Internet Explorer browser and check the Web page does not show up Error.

7. Disable anti-virus or anti-malware software

Similarly, as the Improved mode of protection in Internet Explorer, Antivirus or AntiMalware may have detected a suspicious file in the data of your IE browser and, therefore, some features will not work and may cause the error Internet Explorer Can not View the Windows XP Web Page or higher versions. Try to disable Antivirus or AntiMalware and check if it works.

The taskbar in the window is a very useful shortcut and can be used to disable the software.

Click on ^ symbol on the right side of the taskbar.
Now, locate your antivirus or anti-malware and right-click on it.
Now click on the deactivate option.

Now, restart your browser and if the error is resolved. If the problem is resolved, you must perform a scan to remove suspicious data or files and also enable web protection in your antivirus or anti-malware.

8. Use the Google DNS server

Since Google provides a free DNS server, you can try using it instead of automatically detecting it. To do this, follow the steps below:

Open the Control Panel by pressing the Windows key.

Now click on the Network and Internet option.

In the new window, click on the button Network and Sharing Center.

Click on the source of the Internet, WiFi or LAN.

Now, on the connected network, like WiFi or LAN, right click and choose Properties. Here, IPV6 connectivity does not matter if Enabled or Disabled.

Click on Internet protocol version 4 & then click Properties.

Select the radio button, Use the following DNS server addresses and type the following:

Preferred DNS server: 8.8.8.8
Alternative DNS server: 8.8.4.4

Then press the D & #39; agreement button.

Now, restart Internet Explorer and check the web page now.

9. DNS Flush

If the Google server change did not work for you, try clearing all DNS settings as follows:

press the Windows + X key and open Command Prompt in admin fashion.

in the Command Prompt, enter the commands below one by one and press Enter.

ipconfig /flushdns

nbtstat –r

netsh int ip reset

netsh winsock reset

Once you're done, enter the exit order.

You can now restart your computer to make changes. As a result, now when you open the browser, the error Internet Explorer does not load the Web page is resolved.

10. Reset your browser settings

If all of the above steps did not help you, you can reset the browser settings. This will start your browser from the beginning without any stored data and will help you to resolve the error Internet Explorer can not display the web page.

Open the Run command using the Windows + R key.
Now in the search field, enter inetcpl.cpl and press Enter key.

Click on Advanced tab and click on the reset button.

In the new window, check the box Delete personal settings option.

Now, press the reset button.

Once the process is complete, restart your PC and look for the error in the browser.

11. Update the browser or Windows

It is possible that you do not have the latest version of your browser or Windows, or both are obsolete, which has the consequence Internet Explorer can not open the Web page Error. Update them and reboot to check if the error is resolved.

Update Browser:

You can visit the Internet Explorer website in an alternative browser or another PC to download the latest version and install it.

Update Windows:

Follow the steps below to update your Windows to the latest version.

Open the Windows settings, using the Windows + I key.
Now click on the Update and security option.

In the next window, press the button Check for updates button in the Windows Update column.

Install the updates and reboot your device. After rebooting, check the Internet Explorer does not load the Web page Error.

12. Open the browser in the clean boot

Third-party software can sometimes conflict and cause many errors, including Internet Explorer will not load the web page Error. Perform a Clean boot is the solution to this type of problem and the steps below will guide you to perform a clean boot.

press the the Windows key & search System configuration.

In the new window, select the radio button. Startup selective & uncheck the box Load startup components as shown below.

Press OK and restart your PC.

the The Internet Explorer web page does not load The error must be resolved with this method and you can use your IE again to navigate.

Did it work?

The following articles provide your 12 different ways to solve the Internet Explorer Can not Load the Web Page error that has several reasons mentioned above, each with its own solution.

I hope that you will be able to resolve your mistake after reading the article and that if you encounter a problem during the resolution or if you have a question, you can comment below and we will help you as soon as possible . Also, if you have a method that is not mentioned above, comment on it and help others.

<! – ->