The MikroTik Audience is a Wi-Fi access point with a tri-band mesh network. Find out more in this MikroTik Audience review.
MikroTik
A tri-band mesh network for fast transmission MikroTik Audience is more than just a WiFi router: first, it provides a tri-band mesh network, which makes it a great solution for large rooms, and second, it has the air with a few LEDs.
Check out the MikroTik Audience review by Android Authority to see if this is the best router for you. The Internet. It contains three radios, one in the 2.4 GHz band and two in the 5 GHz band. The second 5 GHz is dedicated to public-viewer communication in a mesh configuration. The 2.4 GHz radio supports 802.11b / g / n (i.e. WiFi 4), and the 5 GHz system supports WiFi 5 (i.802.11a / n / ac).
The public uses RouterOS, a MikroTik dedicated operating system common to all wireless routers. There are also mobile apps for Android and iOS. In a mesh network setup, you can add additional audience units to create a single Wi-Fi network in a large area. ., Press the button to pair a new device which is use? The theoretical speed of the MikroTik Audience is good.
The maximum data rate in the 2.4 GHz band is 300 Mbps, which is the same as that of other WiFi-4 routers. The 5 GHz radio can handle up to 867 Mbit / s, and the second highest speed is 1733 Mbit / s. It’s only 2.9 Gbps. With dual-band radio, you can use both 2.4 GHz and 5 GHz bands at the same time. Simultaneously. You can connect your tablet to the 2.4GHz end, then connect your computer or smart TV to a 5GHz radio and use both at the same time without reducing bandwidth. The theoretical speed is of course the theoretical speed. I checked my hearing on the local network. This means I don’t have to rely on the vagaries of an internet connection and the tests are repeatable and repeatable.
When connected to the Hearing Unit a short distance above 5 GHz, the maximum speed is 383 Mbps. As with all Wi-Fi systems, when I move to other rooms in the house, the size decreases. The size of the slope depends on the distance, the thickness of the walls in the house, the materials used to build the walls, etc. At the back of the auditorium you will find two Gigabit Ethernet ports and a power connection.
The first Ethernet port on the main unit is used to connect to the Internet router. The first port also supports Power over Ethernet (PoE), which means you can reduce the number of cables in the device and provide power and Ethernet through the same cable. Suitable for users who need to extend the reach of Wi-Fi networks. In a mesh network, several nodes communicate with each other and find a path to the first device and the Internet.
It’s meshed rather than tied, which means the shortest path will go back to the main block. Path The downside of a simple WiFi repeater is that it can only be used with a radio. You must listen to the same show as the show. This halved the potential bandwidth from the start. The auditorium is a three-band system where one frequency band is used for walkie-talkies, usually referred to as t.
This means that the other two radios can communicate freely with their devices without sacrificing the overall bandwidth to send data. … To another node. Adding a new audience to the grid is simple – just click the primary audience button, then click the added group button. Wait a few minutes. And all! The network uses the same SSID and the same password. The configuration network is sent between nodes on the return flight. If you change the WiFi password on the main site, all other sites will automatically sync to use the new password. Work, your device will automatically switch to the side with the strongest signal.
Regardless of the type of device used (Android, iOS, Windows laptop, etc.), the changes will be made automatically. Stay connected to other nodes until you can no longer failover. In the end, it all depends on the device. The most surprising thing about Audience Unit Mesh is the increase in speed because the third way is like a return flight. For example, in my house, it is connected to the main audience area (it’s called audience 1). ) The bandwidth of another room is 248 Mbit / s. If you add another node to the network and place it in the same room (let’s call it Audience 2).