Start PXE over ipv4 Boot Issue on Windows [3 Ways to Fix]

Start PXE over ipv4 Boot Issue on Windows [3 Ways to Fix]

We all had computer problems. This can be really boring every time the computer that worked well starts generating error messages. Some of these errors may be ignored while others may render your computer unusable. Our website is dedicated to resolving these issues and today we will take a look at the persistent error related to the "Start PXE over IPv4" message.

In this article, we will talk about this error, including its cause and how to fix it if you encounter it. The patches are simple enough to follow. Let us start.

What is the boot problem "Start PXE on IPv4" under Windows 10?

For readers who have never encountered it, this error occurs when Windows starts. This occurs when the computer tries to boot using the PXE option and not from the hard drive itself. There may be various reasons for this to happen. One of the most common reasons is that the hard disk drive is down and the computer can not find any other boot device. Since PXE is used to configure and boot networked computers that do not yet have an operating system, the computer uses PXE as a fallback solution. Another common reason for the PXE Start message on IPv4 is to give PXE the maximum boot priority.

This may also be due to an outdated BIOS, a failed Windows update, or the installation of a secondary storage device. Whatever the reason, we will give you all the methods you can use to say goodbye to this irritating message.

Methods to troubleshoot PXE boot on IPv4

These methods are written in no particular order. As there are different reasons for this problem, we advise you to read it carefully and find the solution that specifically addresses your problem. Let's start.

Method 1: Correct the Startup Order of Priority

"Start pxe on ipv4" occurs when your boot device is not configured properly. It would be lower than the PXE option in the boot priority order. This can usually be avoided by pressing the Esc key, but the fact is that this does not solve the problem. If you see this error message only when an Ethernet cable is plugged in at startup, and not when you are using WiFi, you can be sure that it is one of the best boot order priority problem. To solve this problem, all you have to do is follow these simple steps.

The steps:

  1. Turn off your computer. Turn it on again and repeatedly press the Setup key. It's different on different devices, but you can see the on-screen setup key as soon as your device starts booting in the BIOS settings. If you can not find the correct key, please visit the Internet to find the right key for your device. The time interval allowed to press this key is quite short, do it as fast as you can. Note that if you can already find the Boot tab, you can simply go to step 6.
  2. Use the arrow keys to go to the Security tab. Then select the Secure Boot Configuration option from the menu.
  3. Use the arrow keys again to change the value of Secure Boot. Refer to the instructions given in the menu to change the value from Enabled to Disabled.
  4. Now set Legacy Support to Enabled. Save and exit.
  5. Restart your computer and access the BIOS settings again. If you are prompted to enter a code, do so. Restart your computer and access the BIOS settings again.
  6. Select the Boot menu tab with the help of the arrow keys. Change the order of priority by making sure that the boot device is at the top of the list. The instructions for doing so will be displayed in the BIOS menu itself.
  7. Save, exit, and restart your computer. This time, you will not be able to see the error message Start PXE over IPv4.

If that does not solve your problem, we have another solution that will help you. You can disable Wake on LAN in the BIOS settings. You can find this setting in the Power menu or the Advanced Settings menu, depending on the manufacturer. This should solve your problem.

Method 2: Change the boot device

If your boot device (hard disk or SSD) failed, the computer switches to PXE regardless of the priority of the boot order. The best solution is to run a diagnostic test first, then confirm if your storage device is involved here. You must monitor:

  1. Clicking on the sounds if you are using a hard drive.
  2. Random crashes.
  3. The computer fails to boot sometimes.

If these are your problems, you may need to completely change your boot device.

Method 3: Update the BIOS

Many problems like this can arise from a BIOS obsolete or corrupt. You can update it yourself and the problems will probably disappear. Just follow the instructions on this video to get a clear picture.

Final catch

These are all available methods that you can use to solve this annoying problem of "starting pxe over ipv4". I hope that one of these methods worked for you and that you can now turn on your computer without any worries. However, note that if none of these methods work, you will probably need to use it at your device's service center. If you have any other suggestions or doubts, please let us know in the comment section and we will contact you.

<! – ->

Leave a Reply