In today's article, we will see the possible cause and what you can try to resolve the error code. 0xc0ea000a – which is a Windows 10 activation error you might face if you recently changed your PC hardware – and the device attempts an automatic reactivation and fails.
The hardware for this device appears to have changed. Make sure you are connected to the Internet and try again later (0xc0ea000a).
Unable to activate Windows 10 (0xc0ea000a)
Most of the time, you will come across this Windows 10 activation error if you changed your PC hardware, such as an upgrade to a new processor or motherboard – after the initial activation of the #39; s device. But this error can also be triggered on restart after a system crash.
However, it is well known that this Windows 10 activation error usually corrects itself after a few hours. The explanation for this discrepancy is that sometimes Microsoft activation servers can be inundated with activation requests – hence the server is overloaded – which is why it says to Try again later; as shown above on the error prompt.
So if 24-48 hours has passed after activation problem appeared and your device is still not activated, you can follow the instructions below to manually reactivate Windows 10 after a hardware change .
Reactivate Windows 10 after a hardware change
When you're ready to reactivate, make sure your device is connected to the Internet, then follow the steps to digital license or product key.
If you don't have a product key or digital license, you can purchase a Windows 10 digital license after installation is complete. Here's how to make a purchase:
Launch the Settings app. Click Update & Security> Activation> Go to Store to open the Microsoft Store where you can purchase a Windows 10 digital license.
If Windows 10 was not preinstalled on your device at the time of purchase and you used a product key to upgrade to Windows 10, you will need that same product key after the change of equipment.
To enter your product key, launch the Settings app. Click Update & Security> Activation> Edit Product Key. Then enter the product key.
If you've installed a retail copy of Windows 10 on your device using a Windows 10 product key and then made hardware changes, follow this same process using your Windows 10 key. Windows 10 product.
If this instruction to manually reactivate your Windows 10 device fails to resolve the issue and also the wait time to 24-48 hours has passed and your device is still not reactivated, you can contact Microsoft support.
I hope this helps you!