Fix DPC WATCHDOG VIOLATION Error in Windows [5 Methods] 2023

Well, I know you're frustrated with the WatchDog DPC violation error, but trust me, after following the methods outlined in this article, you can easily fix DPC_Watchdog_Violation on Windows 10, 8, 7.

Although the most boring mistakes are, in my opinion, the Blue screen death (BSOD) errors. BSoD errors appear with a haunting blue screen with the error message written down. These errors cause the restart of the computer, the loss of all unsaved data and work. In this post, I'm going to explain a common BSoD error, DPC error WATCHDOG VIOLATION.

Also, I will present the top 5 methods to correct the error DPC_WATCHDOG_VIOLATION easily.

What is the DPC_WATCHDOG_VIOLATION error?

First, the DPC_WATCHDOG_VIOLATION is a Blue screen error of death.

It comes with a bug check value of 0x00000133. DPC is an abbreviated form of Deferred procedure call. While Watch dog represents the Bug checker. The bug checker usually monitors or tracks your Windows programs and the performance of your computer. When this error occurs, you will see the Violation message, your PC Watch dog (Bug checker) is outdated.

The most likely reason is that DPC is running very long or your system is stuck at interrupt requests. (IRQL) of DISPATCH_LEVEL or above.

This error appears with the blue screen of death with the message "Your PC has encountered a problem and needs to restart."Below, a timer is present for restarting the computer and reading the error text DPC_WATCHDOG_VIOLATION.

The causes

Unfortunately, this error has several causes. However, depending on these causes, several solutions are also available to solve this problem. Here are the most common reasons for the occurrence of the DPC WATCHDOG VIOLATION error:

SSD firmware not supported
Hardware incompatibility issues
Old SSD driver model
System files are damaged
Deprecated or corrupted drivers

There are also other causes. Although we do not have to learn about them because it's not a computer class. We can simply use the methods to correct this error and solve this problem.

5 methods to correct the error DPC WATCHDOG VIOLATION

Among all the solutions, I present you the top 5 methods that have proven to be the most effective and the most accurate. These methods are very simple and effective. Just follow the step by step guide presented with each method correctly. You can try these methods one by one until you find the one that suits you.

1. Ensure hardware and software compatibility

Hardware and software compatibility checking is the first thing to do to correct this error.

For hardware compatibility:

Step 1: If some external devices are connected or installed on your PC, such as an external hard drive or a USB flash drive, disconnect them all.

Note: Leave your mouse and keyboard connected.

2nd step: To restart your computer.

Step 3: If the error is gone, plug your external devices back one by one and to restart your PC after connecting each device. If, after connecting a certain device, the error reappears, you have found your guilty.

Step 4: Now update drivers for this device. If the problem persists even if the drivers are updated, replace this device.

For software compatibility

Step 1: uninstall software or programs that you have installed recently.

2nd step: To restart your computer.

Step 3: If the problem persists, try to perform an operation System Restauration.

2. Update the AHCI SATA Controller Driver

This is the most accurate solution for this problem. Many users have successfully solved the DPC violation of the watchdog using this method. You can follow the steps to do the same thing;

Step 1: press the Windows + X key simultaneously to open the experienced user menu. In this menu, click Device Manager.

2nd step: Now, find and expand IDE ATA / ATAPI controllers.

Step 3: Next right click AHCI SATA controller then click properties.

Step 4: Switch to Driver tab, and click Driver details to verify that you have selected the correct controller.

Be sure that iaStorA.sys is listed as a driver. Then click D & #39; agreement to leave.

Step 5: Go now to Driver tab then click on Update the driver ….

Step 6: Then click on Browse my computer for the driver software.

Step 7: Then click Let me choose from a list of device drivers on my computer.

Step 8: Then click Standard AHCI SATA controller, then click following. Complete the rest of the procedure by following the instructions on the screen.

Step 9: Finally, To restart your computer after the procedure is complete.

3. Use the CHKDSK command

Performing a disk check is a good way to correct this error. Follow these steps to do this:

Step 1: Go on Search bar of beginning menu and type cmd. From the results list, right click sure Command Prompt and select Run as an administrator.

2nd step: When prompted to request authorization, click Yes d & #39; accord.

Step 3: In the command prompt window, type chkdsk / f / r and hit Enter.

Step 4: Next press Y keyboard key.

Step 5: restart your system and let the disk check process finish.

4. Update Drivers with Driver Easy Help

Driver Easy is a good option to update the outdated driver and fix corrupted ones. Follow these steps:

Step 1: Download and install Easy driver software on your computer.

2nd step: launching Easy Driver and click on the button Scan now button. It will then scan your PC for any problematic drivers.

Step 3: Now click on the Update button next to all marked drivers.

Step 4: To restart your computer after fixing all the problems.

5. Disable Quick Start

Disabling the quick start has proven effective in correcting the WatchDog DPC error for a large number of Windows 10 and Windows 8 users. You should also try it by following these steps:

Step 1: press the Windows key + R simultaneously to trigger the Run dialog box. Type Control panel in and hit Enter.

2nd step: In Control Panel, click Choose what the power button does present in the left sidebar.

Step 3: Now click on Change the currently unavailable settings.

Step 4: Scroll down to find Enable quick start, so what uncheck the box next to that.

Step 5: Click on Save changes then leave the window.

Step 6: To restart your computer.

This should fix the dpc monitoring violation error permanently.

Conclusion

Well, no doubt DPC WATCHDOG VIOLATION is very frustrating BSOD error, but fortunately there are several solutions to fix it. We mentioned the best 5 methods to correct DPC_WATCHDOG_VIOLATION Fault. For any questions, doubts or suggestions, visit the comments section.

<! – ->