Fix: Page Fault in Nonpaged Area Error

Fix: Page Fault in Nonpaged Area Error

Blue screen of death Errors (BSOD) are probably the most boring mistakes. A very frustrating BSOD error is PAGE FAIL IN THE NON-PAGED AREA. Assuming you are here to get help, I will explain the details of this error as well as methods to solve he.

What is a page error in unpaved area?

the Not paginated zone is a memory compartment containing data essential to the operation of the system. These data are always necessary. Therefore, instead of swapping the data between the RAM and the page file, the data is permanently stored in the RAM in the non-paged area. Basically, it is in this area that are stored data that should not be moved from the RAM to the page file. When Windows can not access critical data from the memory that is supposed to be stored in the nonpaged area, for some reason, the PAGE FAIL IN THE NON-PAGED AREA the mistake is born.

This error can occur in a office as well as in a portable work on Windows XP, Vista, 7, 8, 8.1 and ten. By facing this error, you can see error codes such as STOP: 0X00000050, STOP: 0x50 etc. However, it can sometimes appear with names such as ntfs.sys or ntoskrnl.exe.


Because of this problem, the system restore may stop working, it is possible that the system crashes frequently, that lost data, faulty hardware or even that access to the computer is totally lost .

The causes

There are different causes for the development of a BSOD page fault error in a non-paged area in different systems. You should learn the superficial knowledge about the causes in order to learn how to correct this mistake. I will tell you about common causes that could be causing the problem. These are the possible causes:

  1. Corrupt, obsolete, or misconfigured device drivers, including graphics card drivers.
  2. Damaged or corrupted sectors on the hard disk on which you installed Windows.
  3. A fault in the RAM.
  4. Page memory disabled or misconfigured in the system properties.
  5. Antivirus software disabled or interfering, especially Windows Defender in Windows 10.

There may be some other reasons as well, but I propose solutions for whatever reason.

Page fault in non-paged area, installing Windows is one of the most sought after request as this error often occurs during the installation of Windows 10 or any other Windows operating system

How to fix a page fault in a non-paged area

I provide you the listing coupled with the guide of Best ways to fix this error without much work. You can try any method selectively or you can try them one after the other.

1. Repair the faulty driver

Sometimes, when you update a driver, it may not be updated correctly, so it starts to cause problems. In this method, you should also look for such problematic drivers and repair them. Follow these steps:

Step 1: Press and hold Windows key + R access Run dialog box. Type devmgmt.msc in it and press Enter in order to open the Device Manager.

2nd step: Now, right-click on the device whose driver you want to install. updated recently and go to properties.

Step 3: Switch to Driver tab and then click on the Return Driver option. Then click D & #39; agreement.

Step 4: If this option is not present on your system, click uninstall option.

Step 5: To restart your PC to reinstall the drivers automatically.

Or,

You can also repair and update the faulty drivers using third party software as Talent Driver, Easy driveretc. Using these apps, it's like having a piece of cake. Just open them and follow the instructions that appear on the screen.

Completed. This could have repaired the error in your system. If the error persists, try the following method.

2. Adjust the paging file manager

If the hardware and the drivers are working correctly, you are facing the Page Fault error in nonpaged area. This method will work perfectly for you. Follow these steps:

Step 1: Open Control Panel. You can do it by typing control In both cases Run or Search box.

2nd step: Now click on System to get there.

Step 3: Move the slider to the left and click Advanced system settings.

Step 3: Let's move on to Advanced tab and click Settings under the Performance option.

Step 4: Now, here too go to Advanced tab and click Change… option under the Virtual memory option.

Step 5: Then uncheck the "Automatically manage the size of the paging file for all readers" check box. Also, select No paging file option and click Together.

Step 6: Keep clicking D & #39; agreement until you close all the Windows dialog boxes, and then to restart your computer.

Step 7: Now do Step 1 at Step 4 again. For the next action, this time, check the box "Automatically manage the size of the paging file for all readers" and select the Size managed by the system option. Click on Together and finish the process.

Completed. You have completed the procedure. This may have solved the problem. Otherwise, scroll to the next method.

3. Run the disk check and check the memory

If the corrupted RAM or defective NTFS volume is causing PPage Fault in Nonpaged Area error on your Windows 10, 8, 7 PC, this method will solve your problem. Follow these steps to correct the error:

Step 1 press the Windows key + S simultaneously in order to access Search box and then type cmd in her.

2nd step: Now, right click on the Command Prompt and click Run as an administrator.

Step 3: in the Command Prompt, type chkdsk / f / r then press Enter.

Step 4: Then press Y on your keyboard. Wait until the end of the process.

Step 5: Now, press the Windows key + R simultaneously in order to open Run dialog box. Type MdSched.exe in it and press Enter to access Diagnosis of Windows memory window.

Step 6: Then click Restart now and check for problems (recommended) The options. Your PC will restart then.

Step 7: Wait patiently until the end of the process. It can take about 15 minutes.

Completed. This must have solved your problem. If the problem persists, try another method mentioned below.

4. Use the last known good configuration

This method worked accurately for many users. You can try it by doing the following:

Step 1: To close your PC. Now start your PC. When starting, you will see a black screen.

2nd step: When some white text begins to come on this black screen, Press and hold F8 key (Hold F2 if F8 does not work in your case). Keep pressing the key until you see Windows Advanced Options Menu.

Note: In Windows 8, 8.1 and 10, you must first enable the F8 key..

Step 3: In the list of options that appear on your screen, select the Last known good configuration one and press Enter. Your PC will then reboot and the error will be corrected temporarily.

Step 4: To close and beginning your PC again, but this time press and hold the key F12 key (Hold F10 if F12 does not work in your case) when you white text J & #39; arrives black screen.

Step 5: In the list of available options, find and select Disable memory cache, save the frame and exit.

Step 6: To restart your PC and let it start completely.

Step 7: Now, press the Windows key + R open Run. Type chkdsk / f / r C: in it and press Enter.

Step 8: Wait patiently until the end of the process.

Completed. You have managed to solve the problem like a pro. However, there are more ways if you still want to try. Scroll down.

Troubleshoot page problems in non-paged areas Windows 10, 8, 7, XP

Sometimes simple methods work like a charm over complex methods. Here are some simple methods you should try to fix page defects in non-paged Windows 10 areas.

Fix by disabling or uninstalling Anti-Virus

If the anti-virus program is causing the problem in your system you should try either deactivation or uninstall anti-virus software. Then check if the error is gone.

Note: Disabling or uninstalling the antivirus is a risky action and is not recommended permanently.

Windows 7 hotfix

If the RAM is the main responsible for this error, you have to open the external panel of the processor and check your RAM for problems. You should remove the ram, clean wisely and then reinsert correctly. then to restart your PC and check the error.

Note: RAM is a delicate part of your computer. You must handle it carefully otherwise you could damage it permanently.

Page_Fault_in_Nonpaged_Area Hotfix Windows 8, XP

Do the action mentioned in the picture.

Modern systems also allow you to restore your computer to its default state by accessing Recovery partition. You can learn more about the procedure on your manufacturer's website.
Or,
if you want to access Recovery Manager under Windows, first click on beginning button and then click All the programs. Now select and open Recovery Manager. Then go to recovery process.

Note: Before proceeding with the recovery process, make sure that you have made a full backup of your computer data elsewhere as the recovery process will uninstall all previous programs and erase the media content from your PC / hard drive.

Conclusion

These were the best proven working methods to solve Page fault in the non-paged area under Windows XP, Vista, 7, 8, 8.1 and 10. You have correctly cleared the error if you have applied one of the methods correctly. You can now enjoy your computer without the BSOD error message appearing on your screen.

<! – ->

Leave a Reply

Your email address will not be published. Required fields are marked *