If you receive an error message that says – There is no fixed disk to display, when using diskpart in Windows 10/8/7, this post will help you solve the problem. This usually happens when the computer is unable to detect the connected hard drive. If this happens on the primary drive, the computer may not start at all. The same can happen with a USB stick or an external storage device. In this article, we will explain how you can resolve this error.
There are no fixed disks to display – Diskpart
The reason for the error could be a wiring problem or something happened to the storage device. In both cases, it is possible to correct it. Depending on the cause of the problem, one of these solutions should be able to resolve the problem.
- Check hardware connectivity
- BCD corruption
- Rebuild MBR
- Install or update the drivers.
1]Check hardware connectivity
Sometimes, loose connection of a wire can cause the player to stop or stop from time to time. If it is a laptop, you may need to take it to a service center if the rest of the solution does not work. If you have a desk, you can open the cabinet and manually check the wires. It may not be everyone’s cup of tea, but sometimes basic things like these cause problems.
2]BCD corruption
BCD or Boot Configuration Data is a file placed in the boot folder on the Windows partition storage. It contains startup configuration parameters on how to start your window and also contains a registry hive, also called BCD Store. If there is corruption in this registry, it may not work properly. It is advisable to start in advanced configuration mode, then correct the BCD corruption.
To rebuild the BCD or Boot Configuration Data file, use the command –
bootrec /rebuildbcd
3]Rebuild MBR
The same bootrec The command can be used to correct the master boot record. It records the number of operating systems available on the storage and offers a menu to the user. Here are the options that can correct the master boot record:
- / FIXMBR: it will write an MBR on the system partition.
- / FIXBOOT: This command will write a new boot sector to the system partition.
- / SCANOS: It can scan all the OS installed on the computer.
- / REBUILDBCD: if an operating system is missing, you can scan all the disks and add the missing entry
You may need to boot from the Advanced Boot Options screen to run this command.
4]Install or update drivers
If it worked fine and went offline all of a sudden, it could be a problem with the updated driver. Windows updates are sometimes known to disrupt hardware, and it’s a good idea to restore or update the driver to determine what works for you. If you are experiencing this issue with the VMware driver or any other virtualized container, you may need to update the driver
If you can access Windows and the error is for another drive, you can also use a third-party tool to run BCD commands. Tools like EasyBCD and Advanced Visual BCD Editor can help you solve it easily if you don’t like the command prompt.
I hope the steps were easy to follow and that you were able to resolve the There is no fixed disk to display Mistake.