Fix Kernel Data Inpage Error [6 Methods]

Sometimes you see an error on your Windows 10 screen, in the form of codes such as 0x0000007A, 0xC0000185, etc. These codes refer to Kernel data page error. It displays with an error message like,

":( Your computer has encountered a problem and needs to restart.We are simply collecting error information and restarting it for you.If you want to know more, you can look for this error online later: KERNEL_DATA_INPAGE_ ERROR".

This could happen after installing new hardware or software. It often appears with an error code. So what is the Kernel Data Inpage error in Windows 10, their common codes, the causes of this error and how to correct them.

What's a kernel page error in the pages?

Kernel Data Inpage Error is a corrupt or missing file problem in Windows 10. This error indicates that it is apparently a problem related to the hard disk or the RAM memory and that is why it is called "Error inpage. " This error may appear as several defined codes with an error message. Let's know what really caused this error, their codes and how to fix them.

Common codes and error cause in kernel data

Common kernel data codes Inpage Error

Some of the kernel errors in the pages may occur in the form of codes given below.

1. 0x0000007a
2. 0xc000009a
3. 0xC000009C
4. 0xC000009D
5. 0xC0000016a
6. 0xC00000185

Causes of kernel data page error

This is apparently a hard disk or RAM problem, but let's look at the possible cause of this error without guessing it:

1. Your system's memory continues to crash.
2. Integrity of the compromised disk file system.
3. Attack of some viruses, such as malware.
4. RAM defective or faulty.
5. The software drivers are obsolete.

How To Fix Kernel Data Inpage Page Error In Windows 10

Here are some ways to fix this error:

1. Execute the disk check command

Sometimes a failure of RAM and hardware causes a kernel page error in the data. You can run chkdsk on your computer by following the steps below to eliminate this error:

Step 1. Click beginning menu and type cmd on the search bar.

Step 2. Click Run and log in as administrator.

Step 3. Open Command Prompt on your screen.

Step 4. Type:

chkdsk C:/f /r /x

Step 5. Click Enter

Step 6. Now chkdsk ran successfully.

Now, restart your PC to see if the error is corrected or not.

2. Check the system log in the Event Viewer

You can also check the system log in the event viewer by doing the following:

Step 1. Click beginning menu and type cmd on the search bar.

Step 2. Click Run and log in as administrator and type:

eventvwr
 

Step 3. Open Command Prompt on your screen.

Step 4. Type:

eventvwr
 

Step 5. Click Enter to execute the command.

OR

Step 1. Open Powershell.

Step 2. Type:

 eventvwr.msc

in Powershell

Now, restart your Windows 10 PC to see if the error has been corrected or not.

3. Run the diagnostic tool from the memory to correct an error.

The memory diagnostic tool could correct the Kernel Inpage error. Follow these steps:

Step 1. Open Control Panel on your Windows 10 PC.

Step 2. Select System and security

Step 3. Now go to Administrative tools

Step 4. Select the option Diagnose memory problems in your computer

Step 5. Select Restart now and check for problems (recommended) or Check for problems the next time you start my computer.

Step 6. Now reboot your PC again and check whether the error is corrected or not.

4. Run a clean boot

This is apparently a problem with the hard disk or RAM. Running Clean Boot could therefore fix the Kernel Data Inpage Error in Windows 10 by doing the following:

Step 1. Click Windows key + R open Run bar.

Step 2. Type msconfig then click D & #39; agreement.

Step 3. Open the General tab and select Selective Start

Step 4. Click on the load startup items

Step 5. Click Services beginning

Step 6. Select Hide All Microsoft Services Check box

Step 7. Check now deactivate all.

Step 8. Now click Start tab to open Task director and disable all

Step 9. Click D & #39; agreement save changes and restart your PC

NOTE: After troubleshooting and corrections, enable all settings by running clean boot.

5. Scan and uninstall corrupted newly installed hardware / software

You can run a scan and uninstall the damaged software / hardware. Follow these steps:

Step 1. Analyze and uninstall all newly installed and corrupted software and hardware.

Step 2. Open the Microsoft scanner and run a scan.

Step 3. Now, check and uninstall the new / old corrupt software / hardware.

Step 4. Restart the PC

Step 5. Reinstall all the files.

Step 6. Now, restart your Windows 10 PC to see if the error has been corrected or not.

6. Install and update all drivers

Deprecated drivers could lead to an Inpage kernel page fault in Windows 10, upgrade them by doing the following:

Step 1. Click beginning menu and click Settings

Step 2. Select Update and Recovery

Step 3. Check for updates

OR

Step 1. Click Window touch + R open the Run box

Step 2. Now, type:

 setting: windows update

Step 3. Check for updates

Step 4. Install or upgrade important Windows drivers by clicking Update drivers

Step 5. Now, it will automatically update the installed drivers.

Now, restart your Windows 10 PC to see if the error has been corrected or not.

Final words

So that's all we did to provide information about the Kernel Data Inpage error in Windows 10 and how to fix it. You can fix these errors yourself, but if they do not work, contact Microsoft Product Support Center. I hope this article has helped you to know about Kernel Data Inpage Error in Windows 10 and its fixing. You can add your suggestions and queries in the comments section below.

<! – ->