How to Fix a Bad Cable TV Connection – 2021 Guide
Although it is 2021 and new technologies promise to make our TV experience even better, some things will probably never change! Exactly for this reason, we have prepared this guide for you to consider before doing anything physical on your expensive TV that will make you regret your actions later.
We know accidents happen when we need them the least, but instead of letting the problem piss you off, you might as well try to fix it for a change. Not only will you feel better about not bashing your TV, but you can also switch back to your favorite content before the broadcast ends. So, read the following lines and learn how to fix bad cable TV connection.
Establish the problem
Surely, if you knew what the problem was from the start, you would be able to act on it and fix the problem before your favorite sporting event goes by without you. Even if you are not able to fix things on your own, you should be careful to get all the details about the malfunction so that you can let the repairman know what symptoms your TV is showing. If you’re lucky, you’ve probably stepped on a cable by accident, so you could get it back up and running in minutes without having to make an appointment with a service company.
Get in touch with your TV provider
From our experience so far, it is highly likely that the issues you are having are not related to your wired device at all, and it could be the fault of your TV provider. For this reason, it is important to choose a TV provider that offers good customer support, so they should either respond as soon as you report the problem and resolve the complication, or designate you to resolve the issue on your own if its. intervention is not necessary. . The first thing you should do is call customer service, as that is one of the reasons you are paying the supplier.
Perform a physical reset
If you can’t wait for the support from your official supplier, you might want to take it into your own hands and try to resolve the issue on your own. Pixelization is one of the most common faults of cable viewers. Of course, we could still watch the show, but at what cost. Namely, rasterization implies that you are not receiving the full amount of data that your provider is sending and that the squares you notice on the screen are in fact the missing information.
Since we have determined that reception is the problem, you should try physically restarting your cable box. Simply turn off the TV box and remove the cable attached to the back of it from both the receiver and the power source. After waiting about a minute, you need to reconnect everything and start the device.
Nowadays, some providers offer packages where your online connection, phone and TV reception are combined and unified into one service. It is of the utmost importance to make sure how they treat their customers before opting for this type of service, especially when unforeseen situations arise. So, if you want to get more information about how professional treatment looks, do not hesitate and Read more.
Moving the coaxial cable
It is not unusual for the coaxial cable to move out of position for you to receive an incorrect signal or not at all. This could easily happen if you tidied up the house and accidentally moved the cable without even being aware of it. What you need to do to check if this is what is causing an obstruction is to detach the cable from both the back of the TV box and the wall outlet and make sure each junction is properly connected. After the overhaul, reconnect the cables and check if you can continue to watch your favorite TV show the right way.
Select the correct source
Nodaway, people hardly use their TVs just for watching TV, moreover, smart TVs are used both for surfing the web and for using various apps, from YouTube to Facebook. What the TV also serves is the screen for various game consoles, so you have to be careful when switching from one source to another. Not only can individuals forget to change the source and wonder what happens to the TV connection, but they can also drain the TV’s RAM, causing it to crash or not recognize the device it should be streaming. Patience is all you need when this happens, so you should let it sit for a few moments before trying again. In addition, frequent source changes can damage the outdoor input jacks, especially if you constantly insert and remove the cable. So, in order to secure your device lasts longer, make sure you handle it with care.
Sound failure
You shouldn’t worry if you only receive video signal, while there is no sound. Namely, some TVs need to be fed with additional data that allows them to switch from Dolby Digital Surround to HDMI output. Since this is not a physical issue, you should be able to manage it with your remote. Just go to audio settings and correctly select your sources. On the other hand, there are situations where the sound loss has nothing to do with the selection of the input, but with an inexplicable communication failure between the TV box and the TV device.
When this happens, simply plug in the HDMI cable and put it back. The signal must be restored and the sound restored. Hopefully the aforementioned tips will prove their usefulness and help you when the time comes. Just make sure to slowly check one potential problem at a time and avoid panicking at all costs, as this can only cause additional problems for you instead of fixing them. Fortunately, there are ways to rewind content that you missed, so even if the problem is incurable, you can easily make up for the lost material, which your nerves are not.